Death Star Wall Panel Lamp w/Base for Batteries
Description
Created this with inspiration from Bobafletts design. Created from scratch so it is different but would not have come up with it without seeing and printing their design first. Prints in 3 parts: Base - Printed at Standard Quality 0.2mm with .8mm walls and supports from build plate Walls and Top - Printed at Standard Quality 0.2mm with .8mm walls and no supports. You will also want to rotate it 180 degrees, so the top is on the build plate. Diffuser - Printed at Standard Quality 0.2mm with .8mm walls using vase mode to only print the outer wall. You could print the whole thing, but it may be too thick for the light to pass through. LED Strips Used: https://www.amazon.com/dp/B08H51D8QV/?coliid=I3ULN9NZM5HHYG&colid=5KG3CDBXBCS9&psc=1&ref_=lv_ov_lig_dp_it Battery Box Used: https://www.amazon.com/dp/B07C6XC3MP/?coliid=IR6GCPJQE43GU&colid=5KG3CDBXBCS9&psc=1&ref_=lv_ov_lig_dp_it
Statistics
Likes
0
Downloads
0