JG AUG 3 (AU3G) Fire Selectors Airsoft; Safe-semi and Safe-Semi-Full Auto)
Description
Quick edit as the original creators' piece needed sanding on the edges and corners to make it fit. I also noticed the selector was a little less snappy than the OEM part. So. These selectors now have rolled edges and corners for a better fit without the need to sand. The V-grooves now are a bit wider and deeper and work with a much snappier/surer click. I have printed using; PLA/PETG (heavily upgraded tronxy x5s 2e, 1.75mm black PLA filament and PETG, 60% cubic infill and 0.14 layer height, always print slow [50mm/s ish] and be patient for best results) and; RESIN (flashforge foto 13.3 mono 4k, water washable black resin, 0.05mm resolution). Both worked very well with no finishing needed. Thanks to the original author for making these, they're fantastic and have drastically improved my weapon! I can also use it on a locked-to-semi site now! The last three images are of the original part in fusion 360 to support my changes description. Enjoy!
Statistics
Likes
0
Downloads
0