Gaggia Classic Pro Portafilter Stand
Description
Portafilter stand for Gaggia Classic Pro with 45 degrees lugs originally made by joochung to fit on a Niche Zero. The specific measurements is for a bottomless portafilter from shadesofcoffee.co.uk, but most bottomless portafilters will probably fit. Pay attention to the width and height of the handle (variables HANDLW and HANDLH in the SCAD) - this is most likely the part with most variation. Like the original design, I've included an alignment tab so the stand won't "dance around" when grinding. I don't need it as the stand is pressure fitted to the little knob on the Niche which seems to be enough. The measurements used are the following (all in mm): **PF Stand Height** H=48; **PF Stand Outer Diameter** OD=79; **PF Stand Inner Diameter** ID=70.5; **PF Stand Bottom Thickness** BH=8; **PF Handle Width** HANDLEW=16.5; **PF Handle Height (from bottom of stand) ** HANDLEH=10.5; **Lug Thickness** LUGTH=7; **Lug Length** LUGL=26;
Statistics
Likes
0
Downloads
0