Jigsaw T-shaft blade holder
Description
I got inspired by the jigsaw t-shaft hodler by @rafalmag https://www.thingiverse.com/thing:4582722 the blades were a little loose and the hole was too big for M3 inserted nuts. I started to modify the design to 4 blades with a tighter fit and a smaller screw-hole and tought about a lock for the lid on the bottom end - which is when I decided to change the design entirely and don't use a lid covering the whole thing. The only thing i kept was the t-shaped cutout and general shape. So here it is: My jigsaw t-shaft holder. Box comes in 2 sizes & 3 versions: - normal version with hole for spring and overhang at the bottom end. - no_overhangs version without the bottom overhang and easier spring hole - manual version without spring. Sizes: - small version for blades up to 112mm like e.g. T227D, T218A, T118 - long version for T3 blades up to 154mm like e.g. T344D or T308 Additionally, there are - spring (normal and thicker version) - holder (to clip in bottom holes. 1 for normal, 2 for long version) - Lever (manual version & normal/loose version of the one with the spring connection). The supports can be broken out the easiest with a 1,5mm slot screwdriver. Printed on Ender3Pro with 0,2mm PLA
Statistics
Likes
0
Downloads
0