Handle for 64oz 40oz or 32oz Hydroflask
Description
I needed a handle for my 64oz insulated Hydroflask growler to help more easily pour hot coffee into a cup. I realized after a number of iterations in the design, that it could also work for the smaller 32oz and 40oz insulated hydroflasks with minimal tweaking so I've included numerous ring size options. The standard sizes I measured on my Hydroflasks are below for reference. I've included some larger sizes as well in case you want to put a TPU boot on. Standard Ring Size for older 64oz growler: 124.5mm [Model 1239913 listed on mine] Sandard Ring Size for newer 64oz growler: 120mm [Model F122739 listed on mine] Standard Ring Size for 40oz: 91mm Standard Ring Size for 32oz: 91mm ------------------------------------------------------------------------------------------- I've provided two handle sizes as well as 2 styles of each handle --178mm Tall End2End wi/ a 34mm Gap between handle and Hydroflask - Standard Handle --178mm Tall End2End w/ a 34mm Gap between handle and Hydroflask - Ellipses Handle --158mm Tall End2End wi/ a 32mm Gap between handle and Hydroflask - Standard Handle --158mm Tall End2End w/ a 32mm Gap between handle and Hydroflask - Ellipses Handle ------------------------------------------------------------------------------------------- Hardware Needed 4x - M3 x 25mm Bolt (Button-Cap or Socket both fit) 4x - M3 Nut, or M3 Locknut I'd also like to give props to HespoHusky, who had something very similar back in 2017.
Statistics
Likes
0
Downloads
0