Glow in the dark instrument cluster rings for Mazda 626 GF
Description
Rings for instrument cluster/speedometer of late 90s/early 2000s Mazda models. Like v1, those are made specifically for 626 GF (facelift), but should also fit 323 BJ, Premacy CP and Demio DW. v1 can be found here: https://www.thingiverse.com/thing:4865441 Benefits compared to v1: - Not touching the glass (so no stains left) - (Hopefully) no warping - Not much post-processing, just print and place - Much easier to get 2 colored rings (I used Glow in the dark PLA for the top part) Cons compared to v1: - Needs gluing to the instrument cluster. I used mounting tape instead of a glue and for now it works very good. Mounting tape can be removed without any residue left. The whole mounting procedure can be watched here: https://www.youtube.com/watch?v=XJC4GCp8a3c I printed the bottom part with 10% Lightning infill in Cura, while the top part is 100% infill. Both use PLA, but the top one is Glow in the dark PLA.
Statistics
Likes
0
Downloads
0