Stackable Coax Spacers
Description
This is a 3 piece spacer for 0.405" coax. The spacers fit together like legos and are held in place by the included bolts. It can hold up to 6 0.405" coax cables and 2 smaller 0.250" cables. Additional intermediate sections can be printed and stacked to increase the number of spots for additional cables, but longer bolts will be needed. It is designed to be printed as is with no supports, rafts, or brims. If you decide to use metal machine screws you may have to drill out the holes slightly, but was designed with M6 bolts in mind, but #12 may work fine. I've only prototyped in PLA, but a filaments with good outdoor and UV resistance is recommended if this will be used outside.
Statistics
Likes
0
Downloads
0