Wall mounted Spanner holder
Description
Have spent more than a little time trying to produce a mount for my spanners, wanted something grow when my collection did so had to be individual but only had a small foot print, as well as showing the size of spanner. My first attempts revolved around a screw down the middle and no base plate and although successful reading the spanner size was not. I have attached Fusion360 file so hopefully you can change things to suit other sizes, if not drop a line and I can make one. the base plate is only 1.2mm thick but seems fine. The screw holes are 3.5mm. The holders are at angles of 15° to match most spanners to get them to sit flat to the wall. if some one has a multi colour printer then the numbering can be done in a different colour, or like me you can use a maker pen. Although I do find better results with aycrilic pens when I can find them. I only used a 15% fill and they seem sturdy enough. There is a 2mm chamfer base to cylinder and chamfers around the numbering to. I did have one issue with the 12mm holder it seperated base to cyclinder but i think this was my heavy handed use of an oversized electric screwdriver. But if not happy you can increase the fill.
Statistics
Likes
1
Downloads
0