RAK 5005 case for Meshtastic
Description
This is a case for a RAKwireless RAK 5005-O WisBlock base board, designed with the Meshtastic project (https://meshtastic.org) in mind. It will accommodate the RAK5005-O base board plus the RAK4631 (LoRa), RAK1910 (GNSS/GPS), RAK13002 (IO), and RAK18001 (piezo buzzer) modules. There are seven files required for a complete case, as well as socket head cap screws and a micro push button switch; refer to the parts list below. #WARNING: I AM NOT RESPONSIBLE FOR BROKEN OLED SCREENS; USE THIS CASE AT YOUR OWN RISK! That said, the case fits well and looks very nice. Required hardware: - Four (4) M3x20mm socket head cap screws - Four (4) M3 nuts - One (1) latching (not momentary) micro push button switch: https://amazon.com/gp/product/B086L2GPGX - One (1) 1,200mAh LiPo battery pack: https://www.adafruit.com/product/258 ###Minimum required model files: - RAK5005_Case_Back-med.stl - RAK5005_Case_Back.stl - RAK5005_Case_Button-plate.stl - RAK5005_Case_Button-RST.stl - RAK5005_Case_Frame.stl - RAK5005_Case_Front.stl - RAK5005_Case_Screen-insert.stl ###Extra models/variations: - RAK5005_Case_Back-med.stl - RAK5005_Case_Back-tall.stl - RAK5005_Case_Front-blank.stl - RAK5005_Case_Front-blank_no-screen.stl - RAK5005_Case_Front_no-screen.stl - RAK5005_Case_Screen-insert-ID.stl ###Radio stands: There are multiple versions of the radio stand, with and without logos: - Standalone desktop version of the stand to support a single radio - Wall-mountable horizontal version - Wall-mountable vertical version - Modular version to create an expandable, interlocking bank of multiple radio stands ##Notes: - Wire the momentary switch in-line with the battery wires, to turn power on/off as the RAK board does not have an integrated power switch - *RAK5005_Case_Screen-insert-ID* provides space for a radio ID or other text - *RAK5005_Case_Back-med* and *-tall* allow use of larger LiPo battery packs
Statistics
Likes
0
Downloads
0