Festool MFT/3 Fence Cap
Description
This is a cap to cover the end of the Festool MFT/3 fence. The fence rail hangs out over the edge of the MFT by a few inches. You can inadvertently snag your clothing or arm on the sharp corners of the fence. The cap slips into the end of the fence using no tools or adhesive to hold it in place. It is easily removed. The edges of the cap that align with the working faces of the fence are .1mm behind the face of the fence and should not interfere with normal use when using the fence in either the high or low positions. Printed in PRUSA PETG and recommended temps with 20% infill.
Statistics
Likes
0
Downloads
0