Single Stage and QoL Remix
Description
-** The images used are of my prototype blaster printed in odds and ends of filament at lower quality settings **- I started to put together a solenoid powered Gryphon but came across some small issues with the original files, I had heads of screws interfering with printed pieces or holes not large enough for screw heads to fit. So I modified the files I needed to make my screws fit better, I also tweaked the grips to cover some hardware that was now visible with the solenoid design too. I also modified a standard Talon cage (grip version) with the necessary adjustments to allow the solenoid pusher to work, this then allows any front end to be used with the solenoid grip, be it single stage or even a carbine front. Due to changes in the height of the top solenoid cover, I also have a shortened top Picatinny rail for use with a single-stage blaster. As my blaster was going to have the battery under the grip I modified the grip to allow the wires to come out of the bottom, added a little more inside for wires as well as a proper catch position for the end of the trigger spring. To cover the hole in the bottom for people who don't want their battery under the grip I have included a sling mount to attach to cover the hole. Finally, I have also created a nerf compatible stock point, this will allow the attachment of any nerf compatible stock, I have made the central core removable so you can use a battery stock with the blaster.
Statistics
Likes
0
Downloads
0