Orbiter Extruder for Jubilee using Bolt on Rapido Hotend and LGX-Lite
Description
To assemble the following is required, (2) short Dodge heatserts to attach blowers to mount. (1) 38mm PTFE tube. (4) M3 x 8mm socket heads to mount LGX Lite and wiring stanchion. (4) M3 Square Nuts, thin. (2) M3 Hex Nuts (6) M3 X 8mm countersunk screws to attach to E3D tool plate. (2) M3 x 20mm socket head screws to attach blowers to mount. (4) M3 X 16mm socket head screws to attach 30mm fan to nozzle shroud. Print with preferred material
Statistics
Likes
0
Downloads
0