SD card extension mount; Lanmu
Description
For best results check out my support settings in the pictures. I have an upgraded V6 all metal hot end and BTT SKR E3 Turbo so don't expect to print as fast I did but this was printed with a general speed of 60mm/s, 255C nozzle temp, 25% fan speed, 65C bed temp. it's a little beefy with 2mm walls but I like things a little overengineered. if i do a version two it will have chamfered edges on the exterior but this was a quick design job this evening. To assemble it you just need two of the V slot T nuts and screws, this fits the ones that came with my SV01 perfectly, but let me know if you need it adjusted. I fit the ribbon through the back slot first (SD card will be oriented label UP when inserted) then tucked the front of the extender in and pulled the ribbon through as I slid the extender down. It mounts under the extrusion preferably by the screen. It was a _perfect_ fit for my full size SD card extender but I'll check it with my micro SD card extender soon.
Statistics
Likes
0
Downloads
0