Edison Phonograph Horn "Standard" Cylinder Machine - Split 1mm Walls
Description
Original STL by @zastin17 imported to OnShape and re-modelled to have thicker walls at 1mm (you can change to 2mm in the OnShape if you want) and split in half to print on a more normal sized printer. [OnShape Design Here](https://cad.onshape.com/documents/73e9b85cea02d235120683d4/w/c16156caa92e2804f5422567/e/60df0031355cfc58385faa8f?renderMode=0&uiState=61f260e60a0f0a54cbfe5d55) Printed with a 1mm nozzle, the flared section should be printed at 0.15mm up to join at the cone, thereafter print as you desire. If you print thicker than 0.15mm for the flare you'll have a bad time with unsupported perimeters here and there. The transition from the flare to the cone is a bit fragile, might pay to strengthen it with some superglue (cynoacrylate) or something, or just be careful with it.
Statistics
Likes
0
Downloads
0