Traxxas X-Maxx Stand
Description
Traxxas X-Maxx work/storage stand. I couldnt find a 3D printable stand in my searches and I didnt want to spend all the money on an aluminum one when I have a 3D printer at my disposal, so here we are. Designed in AutoCAD and Printed on an Ender 3 Pro in PLA+. The end caps are for inserting into the ends of your rod to keep the sharp edges of the rod from cutting into the stand over time from spinning. Things you will need: 1" (25.6mm) Diameter tube - I used a curtain rod from Home Depot that is telescoping (a smaller 23mm tube slides into the 27mm tube) so I include 23mm inserts that will fit into the 27mm hole and allow use of the smaller diameter rod, reducing the waste of that curtain rod. I cut the tube to 6" but you can cut it to whatever length you prefer. I also put little rubber pads under the 4 corners to give the base some grip and some foam tape on top. The stand does spin 360 degrees as well.
Statistics
Likes
0
Downloads
0