DnD Box Spellcards and Counters/Trackers
Description
Remix combo from the two listed sources. These boxes/organizers are awesome, but I wanted the spellcard storage from Archa91's design with the counters from Chrichards58's design. Magnets: 6mm x 3mm (qty 8 or 12 depending on which lid/insert you use) DnD Box - Base is the result. Space to store a set of standard spellcards for dnd with a cutout for a finger to remove the cards. The long compartment will fit a set of dice + a few extras, might fit 2 smaller sets. The extra compartment under the counters can be used for either a second set of dice or miniature storage. Counter/roller spaces are mostly unchanged from Chrichards58's design. DnD Box - Lid Several options here. My first design without the insert would potentially allow cards and dice to move around the box. However making this a permanent addition to the lid would prevent it from being used as a dice tray. So you have several choices here: - no insert - basic lid without any changes - no magnets for insert - lid with slots for placing the insert however no magnets to hold it in place. makes it abit tough to close as the insert will slide, but keeps the rolling surface completely smooth - lid with magnets - (I have not tested this one yet) adds magnets to the rolling surface of the dice tray/lid but will keep the insert attached to the lid when closing it (make sure to print the insert with magnets) Counters/Rollers Print 1 HProd (longer) and 1 SProd (shorter). A bunch of choices here for the counters. 2,3,4, and 5 all have the rounded design. 10 has numbers on every face. I personally prefer this one for its versatility and ended up using qty19 of them in my final box. I made both of the rods longer than the original design to fit the counters slightly better. SProd fits max 9 counters, HProd fits max 10. For each counter you remove, 2 spacers can be added to create sections on the counter. Use either the 5mm or 3mm endcap whichever fits better for the space left on the rod (some extra space might be left over on the rods) -The only change to the counters themselves was removing the ring on the bottom surface of counter_4 - I dont see much point in the Death Saves rollers on this. Im using the rollers here to track Temp HP, Bardic Inspiration, HP, and gold. Plenty of other choices for what you want to track (which is why i did not add any permanent identifiers. Just print out w/e color you think matches what you want to track. Mini Box Smaller box. Space for 1 set of dice, a miniature, and the SP and HP rod rollers. 3 choices for lids: plain, crit happens logo, and DnD &-dragon logo.
Statistics
Likes
0
Downloads
0