More angle steering in Turbo Racing C70 (MINI)
Description
I filled black chassis like on on picture by mini metal file in local shop. I drilled (small drill for hand drill 0.8 mm) small hole in half the length of this white thing holding wheel and put small cutted "wire" from paperclip. Printed cintre2_wiesak2 in 0.08mm height layer and with XY compensation 0.05 (XY compensation is need if on program slicer (Cura/Prusa Slicer) not showing good print with good borders, holes, etc.)
Statistics
Likes
0
Downloads
0