AR Wing Pro front (tractor) twin motor mounting
Description
There are 4 degree down thrust line so make sure you put the right motor to the right wing and left motor to the left wing. I use hot glue which is strong enough. I use super glue on motor mount with it so once glued, can not take it down. Only can fitted 20A ESC. can be fitted with Dimensions: 23x12.5x3mm. 3d printing setting. I use Simplify 3D software so here is some setting I did. Motor Mount: Top layers 2; Bottom layers 2, Outline Shells 1; Infill 25% L/R Motor: Top layers 0; Bottom layers 2, Outline Shells 1; Infill 0%; Support yes. It already build in internal structure so not need any infill. I normally do not use fan if you use cooling fan, might just use 40% BRGDS/Augusto Chang
Statistics
Likes
0
Downloads
0