AM8 Power Supply Cover
Description
This is a case for a standard power supply, which can be attached to an AM8 (https://www.thingiverse.com/thing:2263216) aluminium 2020 extrusion frame. The larger part covers the bottom screw terminal of the PSU, the second parts fixes the PSU to the right vertical beam. I designed the backet to use one of the PCB screw holes, because on my unit the top most mounting hole has stripped threads. Additional parts required: - Power supply using standard hole pattern and size: e.g. https://www.amazon.de/gp/product/B084QXJP44 - Power socket with switch: e.g. https://www.amazon.de/-/en/gp/product/B01FQVM9EM Check the pattern drawing if you are unsure about your hole pattern or PSU size. The depth of the PSU should be 53 mm. Nuts and bolts needed: - 3 * M5 x ~8mm bolt - 3 * M5 2020 slot nut - 2 * M4 x ~10mm bolt - 2 * M4 nut - 3 * M3 x ~12mm bolt - Some washers if you use longer bolts
Statistics
Likes
0
Downloads
0