Commodore VIC-20 cartridge guide
Description
This is a cartridge guide for the Commodore VIC-20 and (probably more important) for the VickyTwenty (modern replica board). The cartridge guise is something to miss, when you don't have it. It guides the cartridge into the cartridge connector and also keeps the Power-LED cable out of the way. It is screwed to the board from the under side. This is a bit a critical things. Since the thickness (3mm) cannot be increased significantly, the screws - I have used 2.9mm x 9.5mm (self taping) screws for sheet metal (C 2,9x9,5H, DIN 7981) - could break the guide. I would recommend not to fasten them too much and carefully widen the holes to the nominal diameter (1.8mm) if possible
Statistics
Likes
0
Downloads
0