Kral NP-03 picatinny rail
Description
After liking the rail I produced for his Snowpeak p-35, my friend asked if I could produce something similar for his Kral NP-03.......and here it is! suitable for most materials, it will require supports. The design is pretty open to print settings of your choice but I went for PLA+, 100% infill, 0.2mm layer height. you will need 2 x M3 nuts and 2 x 12mm M3 bolts (or something equivalent) to complete. It may be necessary to ream the bolt holes with a drill bit prior to fitment due to print orientation causing oval holes. Also, the bolts don't need to be tightened to 10000Nm!! a simple little tweak will hold the mount rock solid.
Statistics
Likes
0
Downloads
0