PNV-10T Bayonet Mount
Description
I took inspiration on Orangespy's mount for a PNV-10T to a western Style bayonet mount. I remade the design to fit in the rail of my 2020 produced PNV-10T and to connect to my Rhino 2 via the 4 screws that come with its bayonet adapter. It simply slides into the rail and is secured with a M6 Bolt. You shouldnt need more than a 5mm exposed thread to tighten it down enough to hold it snuggly. Im using a longer one with 2 nuts attached so that i can have a good grip on it. the screw should probeaply not be longer than 22mm or else it would intewerfere with the Rhino mount. I've made 2 Variants of theis mount, one to mount to the front of the Sliding pice and one to mount on the back of it. You definetly need supports for the piece that slides into the rail of the PNV-10T. I would advice against printing it standing up, on the one hand, i think the threads wouldnt come out working and on the other hand i would be woried that it could break on the layer lines
Statistics
Likes
0
Downloads
0