Push/Pull magnetic paddle shifter for sim racing
Description
This is a design for a push/pull magnetic paddle shifter suitable for a custom sim racing wheel. Please check out my [YouTube Video](https://youtu.be/bnpurfk6tmY) showing the design. Additional material required are :- - 2 micro switches - 4 M2.5 10mm bolts - 2 15mm x 2mm magnets - M3 35mm bolt - 3 M3 10mm bolts and nuts The design does not take into consideration mounting onto a custom wheel. You will have to figure that one out yourself :) Bolt holes for the micro switches are not in the design as well as they vary depending on the type of micro switches you get. Leave a comment if you have any questions. Thanks.
Statistics
Likes
0
Downloads
0