Mic Boom Arm Phone/Camera Holder Clamp
Description
This is a phone clamp that can be used to mount a phone (or whatever) to a spring loaded microphone boom arm like the Innogear or even an expensive Rode PSA1. You can go to amazon or aliexpress and search for "boom arm", and sort by price to find one for under $10 usd. If it's got a 3/8-16 rod at the end, it will work. This is designed to be VERY easy to print, and quite strong. It requires no extra parts (besides the boom arm). **To Assemble you will need to print the following:** 1x Mount Rod 1x Frame Bolt 1x Clamp Frame 3x Nut 2x Clamp Tooth (short or long) The LONG Clamp Tooth fits any phone/thing that is 91mm wide. If you don't like excess bolt sticking out the sides on wider devices, you can use the SHORT teeth instead but then it will not clamp smaller devices. The teeth are 15 minute prints, recommend start with LONG and see if if meets your device's needs.
Statistics
Likes
0
Downloads
0