MADTAG_f18 main file
Description
So.. I created this last year, but I was depressed and decided to put my project in the drawer. Today I'm better, so I decided to give this little gift for 2022. works fine on PLA or PeTG Its a modular "armored" fan smoke absorber. or you decide what is this. ( fresh vent and etc ) You need: 8 screws 4mm x 45mm do not include the head. 8 nuts, 1x xt60 port if you want to connect to a lipo battery, 1x mini switch on/off 1x jack to connect the 12v plug. this body configuration is for 80mm x 80mm x24.5MM fan the spacer arms print 4x dont forget Included internal tray support to use activated carbon filter or other filter of your choice. If you want you can use it without the filter to push the wind directly into the VTX of the drone racers when doing the tests and repairs. the parts are modular and there are several add-ons that you can download separately if you need to. This body can be used attached to a backpack. Attention: you can print for your own use but you cannot sale this. ADD-ONS LIST: (EXTRA PARTS) Soldering wire rool arm: https://www.thingiverse.com/thing:5223598 Armored Legs: https://www.thingiverse.com/thing:5223588 Sponge arm: https://www.thingiverse.com/thing:5223602 https://www.youtube.com/watch?v=3EClWR8QxCQ i am posting more videos on the week ( assembly guide e etc )
Statistics
Likes
0
Downloads
0