Wall Clock, Ball Clock Replic (Design: George Nelson)
Description
What you need: 12x Messing Roads 100mmx3mm diameter 12x Balls (print it in 4 different colors) 1x clockwork like this: https://www.amazon.de/Drehmoment-Uhrwerk-Mechanismus-Wanduhr-Basteln/dp/B0949B4XV1/ref=sr_1_10?crid=14ORSNP4RKPM7&keywords=uhrwerk+f%C3%BCr+wanduhr&qid=1643998697&sprefix=uhrw%2Caps%2C150&sr=8-10 some glue Clock Diameter: 330mm Print Settings Printer: Own Build: ndl V3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Generic PLA doesnt matter Notes: Print in PLA, Infill: 20, Speed: 60mm/s, Bed: 60 degrees Celsius, Noozle: 20 degrees Celsius
Statistics
Likes
0
Downloads
0