Speedloader for Umarex SA10
Description
This is a speedloader for the newer generation of 8 shot diabolo magazines from Umarex used at the SA10 and some other airguns. These are mainly made out of rubber, way smaller in diameter and not flat on both sides. I just sized mugi0482's speedloader down and fitted it for this kind of magazine. It works just like his design: - fill in the pellets - shake a little to let the pellets drop into the magazines - tilt it to the side to remove excess pellets - use the lid to press in all the pellets simultaniously Important hint: As you can see in one picture, unfortunately the pellets also fit into the center hole. To get these out I just take the speedloader after the loading and bang it heads over on the table - this way the magazines and the pellets in the center drop out. The other pellets stay inside their rubber slots. The grip of the lid is a little clenched by the speedloader, which happend because of the downsizing. I also made a more loose version, but I actually prefer this one, since it holds the lid in place and the parts together when in a bag for example.
Statistics
Likes
0
Downloads
0