Ashford Knitter's Loom tension holder
Description
This is tensioner holder for Ashford knitter's loom for warping your loom. You clamp this to the side in front of the loom. Ideally it's better if you use 2 heddles. One is your heddle to weave and the other is the heddle to separate the yarn before going to the tensioner. The rods that I have is 1 inch diamater wood rod from a hardware store. Get the screws and knobs from a hardware store to size. I use painter's tape to tape the screw so they don't fall out and it also prevent scratches to your loom.
Statistics
Likes
0
Downloads
0