Axial Wraith 1.9 Easy Access Receiver Box Lid
Description
This was designed to make accessing the Axial Wraith 1.9 receiver box easier. If you've used the BP Customs chassis brace the access to the screws holding the (stock) lid on is blocked. Theres an insert that goes in the box and is fastened from below and this provides mount point for the lid to screw on from above. Requires some additional M3 screws: 4x M3 x 14mm buttonheads for the lid and 4 M3 x 8mm flat head screws
Statistics
Likes
0
Downloads
0