Kwikset Pet / Toddler Resistant Dead bolt guard
Description
Child-resistant Deadbolt guard. My youngest locked me out when I took the trash out. NEVER AGAIN. Came up with this. Installation instructions: 1. Print file as configured on the build plate. 2. Back out screws on the interior deadbolt latch faceplate just enough that it wobbles. 3. Slide the thin side underneath the deadbolt latch faceplate from the side at a 2 o'clock or 10 o'clock angle. 4. Once positioned, tighten the screws to secure. IN THE EVENT OF AN EMERGENCY, RIP THAT $H!T OFF! (I purposely designed it with the slide under portion just 1mm thick so that it could be quickly removed in an emergency) Printed 0.6mm nozzle 2 walls 5% Gyroid infil. By printing this design and using it in your home you assume ALL liability in any event.
Statistics
Likes
0
Downloads
0