Floating Ring for Growing Riccia Moss
Description
Floating ring to contain Riccia moss in a freshwater aquarium/tank. Can be flipped upside down if you want it to float higher or lower in the water. The wall is 9.5mm high, which seems to hold the Riccia from escaping. It's about 75mm in diameter. Print with PLA. Thicker side of the ring on the print bed. 2 layers for walls, 2 layers for top and bottom. No infill required, due to the angled walls which make it easy to print (no overhangs or bridges).
Statistics
Likes
0
Downloads
0