Mosin Negant Bent Bolt
Description
This is a Mosin Nagant Bent Bolt Body, if you don't want to modify your original steel bolt, you can print this bent bolt, and assemble all the other bolt parts. the design is to ensure part strength when opening and closing. Print Settings: Between 0.2 / 0.1 layer height. Set infill to 25% density. Infill pattern grid. Infill Line Multiplier set to 10. Supports on. Build plate adhesion: Brim Orientate the bolt body straight up with the bolt handle closer to the ground.
Statistics
Likes
0
Downloads
0