KiNG Odin-5 F3 Shroud Stock Hardware
Description
Quieter than my old Odin-Be-Quiet package and finally my own ducting. BLTouch offset: x=0, y=-30, z=-2.5 REMOVE THE METAL PLATE THE PART COOLING FAN USED TO MOUNT TO! Needs: 2x m3x16mm screws for the hotend fan (8mm longer than stock) OR! 2x m3x20mm screws for hotend fan+metal grill 2x m3x8mm screws for wire bracket 4x m3x6mm screws for wire tie-down and ABL 2x m3x4mm screws to for ABL mount (reuse the right 2 stock shroud screws) 2x m3x25mm screws for back ducting and spacer. Make sure this fan is oriented as an exhaust 2x m3x10mm screws for the motherboard fan and the fan needs to be turned around to suck air away from it and blow toward the rear exhaust. If you find my parts helpful, please consider donating to continue my research and progress in my projects. Paypal: Mike.king.2590@Gmail.com Venmo: @Maikumizu Cashapp: $Maikumizu https://www.patreon.com/KiNG3D
Statistics
Likes
0
Downloads
0