Fusion 3, F400 or 410, BT Temp Humidity Monitor
Description
Fusion 3, F400 or 410, BT Temp Humidity Monitor Cheap BT way to track your printers environment. Mounts using bolt pattern for the exhaust fan. Temp/humidity probe snaps into holder. Nice part is this probe will sync with your BT device and you can track the heat / Humidity over the whole build. Don't Use PLA or low temp materials to print the heat could cause a failure. My units get well over 100° while printing. Required Parts: (1) https://www.amazon.com/Govee-Temperature-Humidity-Notification-Monitor/dp/B07Y36FWTT?pd_rd_w=4PGi2&pf_rd_p=bb77d25e-38d7-4c74-a263-e922267edaaa&pf_rd_r=1P4KFZ0MGV1Z540KRRKM&pd_rd_r=b8548322-faa6-4d3d-bd8b-26d7598b455d&pd_rd_wg=oGcwt&pd_rd_i=B07Y36FWTT&psc=1&ref_=pd_bap_d_rp_3_t (2) Zinc-Plated Alloy Steel Hex Drive Flat Head Screw, M5 x 0.8 mm Thread, 16 mm Long
Statistics
Likes
0
Downloads
0