Ghostbusters, Spengler's Neutrona Wand, Tip Replacement
Description
These tips is a replacement for the original neutrona wand tip from Hasbro. The part needs to be painted with clearcoat/silver/chrome before assembly There are 4 versions in this package. GB01 - Is almost a copy of the original tip. GB02 - Has the style of the original tip but the tube has been designed to look more like the prop in the movie. GB03 - Has the style of the Ghostbuster 1 and 2 including the tip tube. GB04 - Has the style of the Ghostbuster 1 and 2 with no tube. I do not claim that these are accurate to the movies. But i do think they look more accurate then the original tip. Installation procedure: - Pry the original tip off - Unscrew the allen screw (we are going to reuse it) - Carefully pry of the brass look-a-like connector (it will break) - Use a sandpaper or similar to flatten the bottom of the brass look-a-like connector - Use a 3mm drill and drill thru the hole that the allen screw first sat in to make the allen screw pass thru. - Carefully us a 6mm drill from the bottom of the brass look-a-like connector. The connector is aprox 7 mm thick. The new moutning for the screw protrudes 5mm so you almost have to drill thru. - This is becuse the original screw is very short. - Slide on the new tip, use some glue if you want it to be permanent. - Reattach the brass look-a-like connector and put in the screw DONE!
Statistics
Likes
0
Downloads
0