Open Auto Pro / Raspberry Touchscreen 7" Radio Holder
Description
Hi! I needed a touchscreen / Raspberry Pi mount for our T4, because we have no space in the normal DIN radio compartment. The mount is simply placed on the dashboard. I also added velcro to the bottom so that the radio does not slip. The normal Raspberry PI 7" touchscreen fits in very well. There is enough room in the case for all the other components like DC-DC converter (12v to 5v), sound card, microphone and also an HDMI to flex cable (I'm missing the name for the flex cable for the camera) for the rear camera. The lid has no special locking mechanism. I just closed it with double sided tape. The hole is for the cables. Print: You will most likely get problems with warping. I used a big brim when printing, so I can clam down the edges additionally with clamps. This works very well. ABS would be the best option here. I printed mine from PETG. PETG won't like the UV exposure in the long run but a varnish can get around the problem.
Statistics
Likes
0
Downloads
0