Tube Junction
Description
Today we bring you a fully customizable tube junction, inspired by our [Boat Rail Base](https://www.thingiverse.com/thing:4812555). This was created by request and is currently a work in progress. Did you know? ------------------- Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects: https://codeandmake.com/premium OpenSCAD Customizer Options --------------------------- We recommend you use [OpenSCAD](https://www.openscad.org/) to customize this design. This design has the following Customizer options: ### General * `Configuration` - The type of junction * `Material_Thickness` - Thickness of the material ### Tube * `Tube_Profile` - The shape of the tube * `Round_Tube_Inside_Diameter` - The inside diameter of the round tube * `Rectangular_Tube_Inside_Width` - The inside width (X/Y axis) of the rectangular tube * `Rectangular_Tube_Inside_Height` - The inside height (Z axis) of the rectangular tube * `Min_Tube_Length` - The minimum length of the tube * `Tube_Bevel_Percentage` - The amount to bevel the end of the tube (as a percentage) * `Grub_Screw_Hole_Diameter` - Grub screw hole diameter. Not threaded. Will require manual tapping. Material -------- We recommend printing this in a durable filament, such as ABS, nylon or even metal! Versions -------- * 0.1 (11 Feb 2022) - Initial version - work in progress Printing -------- Recommended slicer settings: * Resolution: 0.1mm - 0.2mm * Infill: ~50% or higher if you need it to be extra durable. * Supports: Should not be required * Rafts: Not required, unless you experience adhesion issues. License ------- The "Tube Junction" models (.stl) are licensed under the [CC BY](https://creativecommons.org/licenses/by/4.0/) license by [Code and Make](https://codeandmake.com/). The "Tube Junction" code (.scad) is licensed under [The MIT License](https://opensource.org/licenses/MIT) by [Code and Make](https://codeandmake.com/). Note: 'BSD' license has been selected as it is the closest available option in the list. We are proud to offer content to you absolutely free. ------- We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below: https://codeandmake.com/support We thank you so much for your support!
Statistics
Likes
0
Downloads
0