Bag Clip with automatic snap-in mechanism
Description
Object Description: Inspired by our bought bag clip which is not usable because of extreme thin film hinges, I transferred the only good design point of it to my already existing bag clip with strong hinges. I removed the hinge based closing mechanism and replaced it by a automatic snap-in design. The clip can be opened and closed now with only one hand. A great advantage if you have only one, which I hope is not the case. The clamping length is mentioned in the file name. The 40mm version is added here. This bag clip is available in different length under the following link: https://www.prusaprinters.org/de/prints/126244-bag-clip-with-automatic-snap-in-mechanism Please understand the cross-link. I would like to manage all the variants only once. If you prefer the manual locking mechanism, this version is still available here: https://www.prusaprinters.org/de/prints/116477-bag-clip-with-strong-hinges-and-a-strong-locking-m Advantages: - Stable hinge - Wobble-free hinge design - Allows one hand operation - It clamps reliably even thin bags - Marble pattern in the grip zone for a better finger grip - The snap-in mechanism works very well with PLA Comments: - Print the clip on the side as suggested in the data file. There are small supports in the hinge that would not work if you turn the clip on the top side. - After printing, the hinges must be broken loose. - After bending back and forth several times, the hinges turn much smoother. - The design is made for a layer height of 0.2mm. Other layer heights have not been tested. Comments about successful or unsuccessful prints in other layer heights are welcome and will be added to the object description later. - The offered lengths should be sufficient for most users. If there is a need for other lengths, please leave me a comment.
Statistics
Likes
0
Downloads
0