Parkside 20v battery adapter for TS100
Description
This is an adapter made to fit a Prakside 20V Performance battery. It has a place for (from left) an LED, a 5.2 x 2.5mm DC port, and an On/Off switch. Resistor connected to the LED is 1k Ohm, and everything is wired as in the picture. Assembly: 1. [adapter_middle_v1/v2] goes on top of [adapter_bottom], and screws in with 4 x M4 bolts. 2. You can put your electronics now, or after the assembly, but now you have more room for manipulating everything inside ;) 3. [adapter_top_main] goes on top of [adapter_middle_v1/v2], and screws in with 2 x M4 bolts. 4. [adapter_top_cover] slides in a slot in [adapter_top_main]
Statistics
Likes
0
Downloads
0