Furniture Leg Extension
Description
This is a simple leg extension for my couch. It's designed to work with any tapered leg that has a ~70x70mm end. Secure it in place using a screw. Printing instructions: Set your extrusion width to between 0.6-0.62mm Perimeters: 6 Slicing height: 0.32 You may need to enable overlapping perimeters or mess with the extrusion width a bit to get it to slice optimally. Ideally this model will slice with all perimeters (except for a bit of infill at the start) & no gap fill.
Statistics
Likes
0
Downloads
0