2-Button Flight Stick Grip
Description
19mm is 3/4" tube (close enough) 222mm is 7/8" tube (close enough) If you need to scale this up or down for the control column diameter, you'll screw up the switch holes and may need to do a little touch-up with a drill. The switches I used for the design need a 7mm shaft and 10mm nut in order for the 14mm OD socket to fit in the impression. I used these Twidec switches from Amazon... https://www.amazon.ca/dp/B07RW2YZ4W/ref=cm_sw_em_r_mt_dp_MZSBMDMBEE17QNH7JZD5?_encoding=UTF8&psc=1
Statistics
Likes
0
Downloads
0