MultibotCNC - Holder for Proxxon FBS 240/e - Engraver/Router
Description
This is a MultibotCNC v2 Adapter plate for Proxxon FBS 240/e (and perhaps other Proxxons) to use them as CNC router/engraver. There are three versions: 1. Laserholder_Proxxon - the original laserholder from reality_boy with additional holes for mounting both clamps. This is usefull if this is just a side-feature and you want to dualpurpose the laserholder. It does flex quite a lot. 2. Bodenplatte_lang - same size as the laserholder, but longer and therefore more rigid base distance for the clamps. This holder can reach the base plate with the router bit. 3. Bodenplatte_kurz - shorter base size, but same clamp distance. Much more rigid, a lot less flex/slag. This version CAN'T reach the base plate - lowest point of the Chuck is 38mm so with a 40mm router bit you need at least 20mm spillboard to cut through. Both clamps are mounted with a captured M3 nut and a 16mm M3 screw. You can - if needed - print it solid, but i would not advise to do so it as the clamps would be prone to breaking (layer lines).
Statistics
Likes
0
Downloads
0