Delta effector for E3D Revo micro, with autolevel mount (opt.)
Description
Hi! I ordered the amazing Revo micro and wanted to build it into my delta 3D printer. I designed a delta effector which has all of the features would want / loved from other designers. You can download it as well and I hope you have an amazing experience with the effector and the revo micro! Although heavlily inspired from some others, this is build from the ground up. (Share a picture if you decide to use my model as well! would like to see how you printed it! :)) Design features; - Access to the Revo nozzle for easy swapping. - Wiring of the heatercore goes thru the fanduct to behind, for a clean look. - Open designed front sow you can see your print. - 200 degrees around part cooling. - 3x25mm fans for good part- and heatsink cooling. These need to be ordered, and can be directly 24V so you do not need to use the step-down converter* - M12 mounting hole. - Place to mount and use an Anycubic / FLsun type fixed mounted probe. - Embossed lettering (dual extrusion optional). Techspecs; Arm distance 40mm (if needed differently, leave a comment) Center to arm distance 25mm Nozzle to probe offset; X0 / Y2.25 / Z approx.16.85, but measure this to be sure, can be different) Needed hardware; Arms; 6x M3x20 Fans; 12x M3x14 (depending on fan) Fanduct; 4x M3x10 Autolevel; 2x M3x10 * For fans I recommend these; https://nl.aliexpress.com/item/32965738360.html?spm=a2g0o.store_pc_groupList.8148356.4.20091d86SXadHl The're available in 12V and 24V, with sleeve bearing (quiet) and ball bearing (long-life) This is still a work in progress, so things can change
Statistics
Likes
0
Downloads
0