iFlight Albatros FPV Antenna Shell Replacement
Description
This is a Replacement shell for the iFlight Albatross Series (hammer style) and similar style antennae. So the story is , i really liked this antenna, until i crashed hard a few times and it seemed to loose reception and just not work very well. so i wanted to take it apart to see if i could repair it. Turns out easiest method is to cut with a fine hacksaw or coping saw blade, gently in a vice, around the edges you can cut away the bottom shell to reveal the antenna inside. mine had the fins pushed almost flat by the protective shell. this is pretty common in these style antennas, they will get pushed from the stem down on the antennas, and deform the main antenna fins. you can straighten them out so they are all parallel with eachother. hopefully this makes sence and helps some people. thanks!
Statistics
Likes
0
Downloads
0