Dremel 395 Arbor Press Mount
Description
This mount allows a Dremel 395 to be mounted onto an arbor press to act like a miniature drill press. It has been modified to work with 8-32 nuts and screws and optionally a 1/4-20 bolt can serve as a depth stop. I suggest a fairly high infill ( I used 50%) and two or three perimeters. Supports are required for the mount, but it doesn't use much material. If using the depth stop hole, clean it up with a tap. A step version is included to ease adapting it to other presses and adding improvements.
Statistics
Likes
0
Downloads
0