3018 Pro Dust Collector
Description
Dust collection for the 3018 style CNC. Just pick the style you want either a vertical style or the horizontal. I printed the horizontal cause my machine is in an enclosure. *NOTE* Before you print out the nozzle be sure and measure the gap between the bottom printed piece and the surface of what you cut the most in my case its 3/4 inch stuff, Than using your slicer change the Z to a few millimeters short of that measurement. I made the magnet holes extra deep so that if you scale the Z low they will still fit in. I printed a nozzle for 1/4 inch and another for 1/2 inch. I have not printed the tube because I used some 1 inch PVC pipe so you may want to just print a few mms of the tube and do a test fit
Statistics
Likes
0
Downloads
0