RE-PET-Ender
Description
It's my home tool for recycling PET bottle to filament. This design, based on replaced Ender parts. I had the board, screen, hotend, fans and the stepper motor. I only paid for the PSU 15$ and screws 15$ and the filament 20$. So at all it cost me around 50$. When you have some outdated 3d printer parts in your desk, it’s maybe the time to use it once again. Just with two part remix you can use almost any marlin compatible mainboard and screen to control it. The project goal is to be as cheap, easy build, modify and compact as possible. Work is in progress. Soon I will make detailed installation description. Please consider buying me a coffee if you want to help the process. Size: 48cm x 24cm x 20cm Electronic parts list: 1x Ender mainboard 1x screen (I used ender v2 screen) 1x nema17 42mm stepper motor 2x 24V 4010 fan 1x 24V 4010 turbofan with stock fanduck 1x thermistor 1x 24V heater 1x 24V 100W slim PSU 1x Power cord Other parts list: 1x sniccer blade 4x 608ZZ bearing 2x 625ZZ bearing 3x 450mm M8 threaded rod 1x 100mm M8 screw 1x 50mm M8 screw 30x M8 nut screw 1x 90mm M5 screw 1x 40mm M5 screw 3x 25mm M5 screw 5x M5 nut screw 24x M3 insert nuts (not necessary but it's better. When you use it you need to drill with 4mm drill bit first) 24x M3 screws 10x M3 6mm screw 13x M3 10mm screw 2x M3 30mm screw 2x M3 15mm screw 2x M3 35mm screw 4x M6 screw washer 18mm tools 1.6 mm drill bit 2.5mm drill bit 4mm drill bit 5mm drill bit 5.5mm drill bit 8mm drill bit 8.5mm drill bit 5 step drill bit 4-12 iron saw 3d printer :)
Statistics
Likes
0
Downloads
0