Talonclaw/Caliburn K25 Plunger
Description
I recently built a talonclaw, and bought a k25 for it, but couldn't find any plungers that were sized for the spring, only k26s, so I quickly drew this sucker up. It's just a normal plunger with a slightly larger inner diameter to accommodate for the size of a k25. I beefed up the walls a bit in order to compensate for he larger diameter too, so it should be the same strength. I've been using it for a few games, and its been fine so far. I printed it at 100% infill with 0.2 mm layer height. Thanks for checking my model out, and happy printing!
Statistics
Likes
0
Downloads
0