Filament empty sensor for directextruder Tronxy +others
Description
Now I reached the very best quality with this inexpensive printer (120€ in 2021). After some improvements like taking the stock parts to covert into directextruder. Because of the more weight on the x-Axe now - printhead and extruder with its steppermotor. At first I decided to add a second z-spindle-axe so I reached no bending down on the right side. And from now on the filament comes from above and the movement - right and left - of the printhead brings me the sorrow the filament could break - sometimes its brittle and breakable. In addition I was looking for another location for the runout sensor, I will not miss it. So I construct the sled moving a bit right to left and the sled carries the Sensor with its enclosure. I'm sure, this would be the problem also for other brands. Also I'm sure there are some out in the depthspf the internet to need this too - enjoy! perhaps you visit my youtube channel to find diy videos and perhaps you'll improve your german, like I do with english videos. And especially the video how I maked this thing. https://www.youtube.com/c/basteley Thanks - bye-bye from good old Germany Wolfgang Ley - Basteley
Statistics
Likes
0
Downloads
0