Detachable clamps De Walt Tablesaw
Description
These are Clamps for the De Walt DWE 7491 and 7492 , they should be made out of ABS or a higher rated tool filament. infill i used is 20 % honeycomb with a solid layer every 10 layers. printed in 0.2 mm layer height . i did use a 20 mm brim around it for extra adhesion to the bed. itook off the handle and the wheels from the stand itself , and with that i bolted the clamps on the stand frame. i needed it to be more compact. if you do not want to take it off you will need 4 m8 60 mm bolts with nuts. if you set the stand up , you now can simply click the tablesaw on top of it , and removing it is very easy, yet it is strong enough that it will keep in place when you are set it up to use it.
Statistics
Likes
0
Downloads
0